Mercury Marine
Engine Installation User Agreement
(A written copy of these instructions is available
free of charge, from Mercury Marine, by calling 920-929-5110.
After completing the installation, these instructions should
be placed with the Product for the Owner’s future use.)
Notice to Boat Manufacturer/Installer
This installation manual has been written and published by Mercury MerCruiser to aid the boat manufacturer (OEM) in the installation of the products described herein. It is assumed that these personnel are generally familiar with marine product installation, and specifically familiar with, if not trained in, the recommended installation procedures of Mercury MerCruiser product. No attempt has been made to provide information sufficient for an untrained, or improperly trained mechanic to properly install the Mercury MerCruiser product. If your product requires technical assistance, and you are not a properly trained mechanic, please contact your local authorized Mercury Marine servicing dealer for assistance.
We could not possibly know of or advise the marine trade of all conceivable installations and of the possible hazards and/or results of each installation. Therefore, the OEM is responsible for any installation that does not fulfill the requirements of this manual.
It is the responsibility of the boat manufacturer to select the appropriate engine/transom/drive package (including the correct gear ratio and propeller) for a given boat. Mercury MerCruiser recommends that any new or unique hull/power package combination be thoroughly water tested prior to sale, to verify that the boat performs as desired, and that the engine operates in the appropriate rpm range.
It is recommended that a Mercury MerCruiser Product Application Engineer (PAE) be contacted for assistance. For assistance outside the United States, contact the local Mercury Marine office or authorized distributor.
All information, illustrations and specifications contained in this manual are based on the latest product information available at time of publication. Mercury Marine reserves the right to make changes at any time without obligation. As required, revisions to this manual will be sent to all OEM boat companies.
Warnings and Cautions
Throughout this publication, Warnings and Cautions (accompanied by the International Hazard Symbol ! ) are used to alert the manufacturer or installer to special instructions concerning a particular service or operation that may be hazardous if performed incorrectly or carelessly. –– Observe Them Carefully!
These Safety Alerts alone cannot eliminate the hazards that they signal. Strict compliance
to these special instructions when performing the service, plus common sense operation,
are major accident prevention measures.
WARNING
Hazards or unsafe practices which could result
in severe personal injury or death.
CAUTION
Hazards or unsafe practices which could result
in minor personal injury or product or property damage.
IMPORTANT
Indicates information or instructions
that are necessary for proper installation and/or operation.
NOTE: Refer to the appropriate Mercury MerCruiser Product Applications Manual for application recommendations.
Important Notice
As part of the installation process, you will be asked to accept the terms of this Agreement. This Agreement is a legal contract that specifies the terms of the user agreement and warranty limitation between you and Mercury Marine for the use of the Installation Instructions and related documentation. You should carefully read the following terms and conditions before installing or using the media. Allaire's willingness to license the software to you is expressly conditioned on your acceptance of all of the terms of this Software License Agreement.
No Additional Rights or Licenses
You may not remove or alter any trademark, logo, copyright or other proprietary notices, legends, symbol or labels in the software. This Agreement does not authorize you to use Mercury Marine’s name or any of its trademarks.
|
